Influence of starch-protein interactions on the digestibility and chemical properties of a 3D-printed food matrix based on salmon by-product proteins.

This study evaluated the influence of starch-protein interactions on the chemical properties and digestibility of a 3D-printed gel based on salmon by-product protein. Changes in the starch-protein interactions of the stable cornstarch (CS, 15%) and salmon protein isolate (SPI, 4%-12%) printable gels during the in vitro gastrointestinal digestion process were studied by principal component analysis. Protein-rich printed gels increased resistant starch content by 18.05%. Changes in chemical properties and the starch-protein concentration of the gels during the digestion process were highly correlated. The CS-SPI gels in the gastric and intestinal phases exhibited lower α-helix/ß-sheet ratio and fluorescence intensity values, whereas surface hydrophobicity increased. This resulted in more ordered structures with a high level of molecular interaction that inhibited enzymatic hydrolysis. This study provides crucial information about the transformations of starch-protein interactions during the digestibility of 3D-printed food matrices as an alternative source of nutrients with a high nutritional quality.

Three-Dimensional Printing Parameter Optimization for Salmon Gelatin Gels Using Artificial Neural Networks and Response Surface Methodology: Influence on Physicochemical and Digestibility Properties.

This study aimed to optimize the 3D printing parameters of salmon gelatin gels (SGG) using artificial neural networks with the genetic algorithm (ANN-GA) and response surface methodology (RSM). In addition, the influence of the optimal parameters obtained using the two different methodologies was evaluated for the physicochemical and digestibility properties of the printed SGG (PSGG). The ANN-GA had a better fit (R2 = 99.98%) with the experimental conditions of the 3D printing process than the RSM (R2 = 93.99%). The extrusion speed was the most influential parameter according to both methodologies. The optimal values of the printing parameters for the SGG were 0.70 mm for the nozzle diameter, 0.5 mm for the nozzle height, and 24 mm/s for the extrusion speed. Gel thermal properties showed that the optimal 3D printing conditions affected denaturation temperature and enthalpy, improving digestibility from 46.93% (SGG) to 51.52% (PSGG). The secondary gel structures showed that the ß-turn structure was the most resistant to enzymatic hydrolysis, while the intermolecular ß-sheet was the most labile. This study validated two optimization methodologies to achieve optimal 3D printing parameters of salmon gelatin gels, with improved physicochemical and digestibility properties for use as transporters to incorporate high value nutrients to the body.

A Study on a Polymeric Foam Based on Pulse Proteins and Cellulose Fibrils.

Biofoams are a challenge for scientists in terms of innovation. Incorporation of cellulose fibrils (CF), might help improve the microstructure of foams, thus this study focuses on studying the impact of CF on the foaming properties and rheology of lentil protein (LP) foams at various pH and CF concentrations. Additionally, LP-CF mixtures were transformed into solid foams, and their microstructure, physical properties, and morphology were evaluated. CF concentration significantly impacted on LP-CF foam properties, primarily due to high viscosity values. Increased CF concentration resulted in improved FS values (up to 77 min) at all pH values. This is likely attributed to associative interactions and coacervates formation. Also, foam microstructure could be related to apparent viscosity, suggesting the role of viscosity in preserving the integrity of the wet foam structure during freezing and lyophilization processes. However, elevated viscosity values might negatively impact properties such as foaming capacity and produce denser microstructures. The microstructure and morphology analysis revealed that certain foams exhibited a sponge-like structure with open pores and semi-spherical shapes, supported by CF fibers extending and forming layers. However, the structure itself was irregular. While others exhibited non-uniform, irregular pore size, and shape, along with a denser structure. These findings contribute to understanding the behavior of LP-CF mixtures, although additional investigations on mechanical properties, biodegradability, and hydrophobicity are necessary to reach their full potential for various applications.

Liposomes Loaded with Green Tea Polyphenols-Optimization, Characterization, and Release Kinetics Under Conventional Heating and Pulsed Electric Fields.

This study aimed to increase the encapsulation efficiency (EE%) of liposomes loaded with green tea polyphenols (GTP), by optimizing with response surface methodology (RSM), characterizing the obtained particles, and modeling their release under conventional heating and pulsed electric fields. GTP-loaded liposomes were prepared under conditions of Lecithin/Tween 80 (4:1, 1:1, and 1:4), cholesterol (0, 30, and 50%), and chitosan as coating (0, 0.05, and 0.1%). Particles were characterized by size, polydispersity index, ζ-potential, electrical conductivity, and optical microscopy. The release kinetics was modeled at a temperature of 60 °C and an electric field of 5.88 kV/cm. The optimal manufacturing conditions of GTP liposomes (ratio of lecithin/Tween 80 of 1:1, cholesterol 50%, and chitosan 0.1%) showed an EE% of 60.89% with a particle diameter of 513.75 nm, polydispersity index of 0.21, ζ-potential of 33.67 mV, and electrical conductivity of 0.14 mS/cm. Optical microscopy verified layering in the liposomes. The kinetic study revealed that the samples with chitosan were more stable to conventional heating, and those with higher cholesterol content were more stable to pulsed electric fields. However, in both treatments, the model with the best fit was the Peppas model. The results of the study allow us to give an indication of the knowledge of the behavior of liposomes under conditions of thermal and non-thermal treatments, helping the development of new functional ingredients based on liposomes for processed foods.

Effect of Rigor Stage and Pressurisation on Lipid Damage, Total Volatile Amine Formation and Autolysis Development in Palm Ruff Stored on Ice.

The effect of the rigor stage (pre or post) and previous high-pressure processing (HPP; 450 and 550 MPa for 3 min) was checked during the storage on ice of farmed palm ruff (Seriolella violacea). Fish processed in pre-rigor conditions led to higher and lower levels (p < 0.05) of moisture and lipid contents in chilled fish, respectively, when compared to their counterpart samples processed in the post-rigor stage. Pre-rigor fish showed a higher (p < 0.05) quality level than post-rigor samples according to the assessment of the K value (59.0-92.1 and 70.3-96.3 ranges, respectively), fluorescent compounds (0.29-1.11 and 0.37-1.90 ranges, respectively), free fatty acids (FFA) (15.1-188.0 and 33.8-232.5 g·kg-1 lipids ranges, respectively), and total volatile amines (216.3-387.6 and 217.7-412.2 g·kg-1 muscle ranges, respectively). Pressure-treated fish showed higher (p < 0.05) quality retention than non-treated samples according to the formation of fluorescent compounds (0.29-0.86 and 0.85-1.90 ranges, respectively), FFA (15.1-50.6 and 58.9-223.5 g·kg-1 lipids ranges, respectively), and total volatile amines (216.3-250.3 and 351.1-412.2 g·kg-1 muscle ranges, respectively) and the evolution of the K value (59.0-77.2 and 86.9-96.3 ranges, respectively). The use of pre-rigor fish and previous HPP is recommended for the commercialisation of the current species as a fresh product.

Effects of PEF-Assisted Freeze-Drying on Protein Quality, Microstructure, and Digestibility in Chilean Abalone "Loco" (Concholepas concholepas) Mollusk.

The purpose of this study was to apply different pulsed electric field (PEF) conditions as a pretreatment to the freeze-drying (FD) process of Chilean abalone and to assess its effects on protein quality, microstructure, and digestibility of the freeze-dried product. The treatments PEF (0.5, 1.0, and 2.0 kV cm-1) and cooking (CO) were applied at 100°C × 15 min. Then, their performances were subjected to a FD process. PEF + CO pretreated freeze-dried samples showed shorter process times than freeze-dried control samples without PEF + CO, where the treatment PEF at 2.0 kV cm-1 reached the shortest time. In addition, the abovementioned samples presented the best textural parameters but a low protein content. The thermal properties indicate a total denaturation of the proteins, where the amide I region presented greater mobility in the sample pretreated with an electric field of 2.0 kV cm-1. The assay for digestibility shows better hydrolysis for the 2.0 kV cm-1 PEF sample and has a higher Computer-Protein Efficiency Ratio (C-PER). Thereby, variations in thermal behavior and physicochemical parameters in comparison to combined PEF + CO pretreatments were observed. In addition, high protein quality and digestibility of pretreated freeze-dried Chilean abalones were maintained to the desired properties (texture and C-PER) and conditions (FD time).

Combined Treatments of High Hydrostatic Pressure and CO2 in Coho Salmon (Oncorhynchus kisutch): Effects on Enzyme Inactivation, Physicochemical Properties, and Microbial Shelf Life.

This study focused on applying different high hydrostatic pressure + carbon dioxide (HHP + CO2) processing conditions on refrigerated (4 °C, 25 days) farmed coho salmon (Oncorhynchus kisutch) to inactivate endogenous enzymes (protease, lipase, collagenase), physicochemical properties (texture, color, lipid oxidation), and microbial shelf life. Salmon fillets were subjected to combined HHP (150 MPa/5 min) and CO2 (50%, 70%, 100%). Protease and lipase inactivation was achieved with combined HHP + CO2 treatments in which lipase activity remained low as opposed to protease activity during storage. Collagenase activity decreased approximately 90% during storage when applying HHP + CO2. Combined treatments limited the increase in spoilage indicators, such as total volatile amines and trimethylamine. The 150 MPa + 100% CO2 treatment was the most effective at maintaining hardness after 10 days of storage. Combined treatments limited HHP-induced color change and reduced the extent of changes caused by storage compared with the untreated sample. Microbial shelf life was extended by the CO2 content and not by the HHP treatments; this result was related to an increased lag phase and decreased growth rate. It can be concluded that combining HHP and CO2 could be an effective method of inactivating endogenous enzymes and extend salmon shelf life.

Potato Starch Hydrogels Produced by High Hydrostatic Pressure (HHP): A First Approach.

Starch-based hydrogels have received considerable interest due to their safe nature, biodegradability and biocompatibility. The aim of this study was to verify the possibility of producing natural hydrogels based on potato starch by high hydrostatic pressure (HHP), identifying suitable processing conditions allowing to obtain stable hydrogels, as well as to characterize structural and mechanical properties of these products. Sieved (small size granules and medium size granules) and unsieved potato starch samples were used to prepare aqueous suspensions of different concentrations (10-30% w/w) which were processed at 600 MPa for 15 min at different temperatures (25, 40 and 50 °C). Products obtained were characterized by different techniques (light and polarized microscopy, Fourier transform infrared spectroscopy (FTIR), rheology and differential scanning calorimetry (DSC)). Results obtained so far demonstrated that potato starch suspensions (20% starch-water concentration (w/w)) with granules mean size smaller than 25 µm treated at 600 MPa for 15 min and 50 °C showed a complete gelatinization and gel-like appearance. Potato HHP hydrogels were characterized by high viscosity, shear-thinning behavior and a highly structured profile (G' >> G''). Moreover, their FTIR spectra, similarly to FTIR profiles of thermal gels, presented three absorption bands in the characteristic starch-gel region (950-1200 cm-1), whose intensity increased with decreasing the particle size and increasing the processing temperature. In conclusion, potato starch hydrogels produced by HHP in well-defined processing conditions exhibited excellent mechanical properties, which can be tailored according to the requirements of the different applications envisaged.

Effect of drying process assisted by high-pressure impregnation on protein quality and digestibility in red abalone (Haliotis rufescens).

Abalone (Haliotis spp.) is an exotic seafood product recognized as a protein source of high biological value. Traditional methods used to preserve foods such as drying technology can affect their nutritional quality (protein quality and digestibility). A 28-day rat feeding study was conducted to evaluate the effects of the drying process assisted by high-pressure impregnation (HPI) (350, 450, and 500 MPa × 5 min) on chemical proximate and amino acid compositions and nutritional parameters, such as protein efficiency ratio (PER), true digestibility (TD), net protein ratio, and protein digestibility corrected amino acid score (PDCAAS) of dried abalone. The HPI-assisted drying process ensured excellent protein quality based on PER values, regardless of the pressure level. At 350 and 500 MPa, the HPI-assisted drying process had no negative effect on TD and PDCAAS then, based on nutritional parameters analysed, we recommend HPI-assisted drying process at 350 MPa × 5 min as the best process condition to dry abalone. Variations in nutritional parameters compared to casein protein were observed; nevertheless, the high protein quality and digestibility of HPI-assisted dried abalones were maintained to satisfy the metabolic demands of human beings.

Influence of high hydrostatic pressure on quality parameters and structural properties of aloe vera gel (Aloe barbadensis Miller).

The aim of this work was to study the effect of high hydrostatic pressure (HHP) on colour, dietary fibre, vitamin C content, polysaccharides content, physico-chemical and structural properties of aloe vera gel at three pressure levels (300, 400 and 500 MPa for 3 min) after 35 days of storage at 4 ± 1 °C. The results showed that HHP exerted a clear influence on most of the quality parameters studied. Moisture, protein and fat contents did not show changes with an increasing pressure. Ash, crude fibre and carbohydrates content increased with increasing pressure. Vitamin C content did not show significant differences after 35 days of storage. The variation of colour in the samples increased at 500 MPa. Total dietary fibre, water holding capacity and firmness increased with pressure. However, all HHP-treated samples presented a decrease in hydration ratio and polysaccharides content; and also minor alterations in the structural properties were produced at HHP of 300-500 MPa, resulting in a high quality gel.

Effects of high hydrostatic pressure (HHP) on the protein structure and thermal stability of Sauvignon blanc wine.

Protein haze development in bottled white wines is attributed to the slow denaturation of unstable proteins, which results in their aggregation and flocculation. These protein fractions can be removed by using bentonite; however, a disadvantage of this technique is its cost. The effects of high hydrostatic pressure (HHP) on wine stability were studied. Fourier transform infrared spectroscopy experiments were performed to analyse the secondary structure of protein, thermal stability was evaluated with differential scanning calorimetry, while a heat test was performed to determine wine protein thermal stability. The results confirmed that high pressure treatments modified the α-helical and ß-sheet structures of wine proteins. Throughout the 60 days storage period the α-helix structure in HHP samples decreased. Structural changes by HHP (450 MPa for 3 and 5 min) improve thermal stability of wine proteins and thus delay haze formation in wine during storage.

Headspace components that discriminate between thermal and high pressure high temperature treated green vegetables: identification and linkage to possible process-induced chemical changes.

For the first time in literature, this study compares the process-induced chemical reactions in three industrially relevant green vegetables: broccoli, green pepper and spinach treated with thermal and high pressure high temperature (HPHT) processing. Aiming for a fair comparison, the processing conditions were selected based on the principle of equivalence. A comprehensive integration of MS-based metabolic fingerprinting techniques, advanced data preprocessing and statistical data analysis has been implemented as untargeted/unbiased multiresponse screening tool to uncover changes in the volatile fraction. For all vegetables, thermal processing, compared to HPHT, seems to enhance Maillard and Strecker degradation reaction, triggering the formation of furanic compounds and Strecker aldehydes. In most cases, high pressure seems to accelerate (an)aerobic thermal degradation of unsaturated fatty acids leading to the formation of aliphatic aldehydes and ketones. In addition, both thermal and HPHT processing accelerated the formation of sulfur-containing compounds. This work demonstrated that the approach is effective in identifying and comparing different process-induced chemical changes, adding depth to our perspective in terms of studying a highly complex chemical changes occurring during food processing.

Microbiological stabilization of Aloe vera (Aloe barbadensis Miller) gel by high hydrostatic pressure treatment.

The effect of high hydrostatic pressure (HHP) treatment (300, 400 and 500 MPa for 1 and 3 min at 20 °C) on the microbiological shelf-life and microbiota composition of Aloe vera gel during 90 days of storage at 4 °C was investigated. Aerobic mesophilic and psychrotrophic bacteria, as well as moulds and yeasts, were enumerated after HHP treatment and through cold storage. Randomly selected isolates from the count plates were identified by standard methods and the API identification system. Results showed that HHP treatment at or over 400 MPa for 3 min were effective to keep the microbial counts to undetectable levels during the whole storage period, and consequently the microbiological shelf-life of A. vera gel was extended for more than 90 days at 4 °C. The microbiota in the untreated A. vera gel was dominated by Gram-negative bacteria (mostly Rahnella aquatilis) and yeasts (mostly Rhodotorula mucilaginosa). In contrast, Gram-positive bacteria tentatively identified as Arthrobacter spp. and Micrococcus/Kocuria spp. were the predominant microorganisms in samples pressurized at 300 MPa for 1 and 3 min, while Bacillus megaterium predominating in samples treated at 400 MPa for 1 min. At 400 MPa for 3 min and above, the microbial growth was completely suppressed during at least 90 days; however, viable spore-formers were detected by enrichment.

Effect of high hydrostatic pressure on functional properties and quality characteristics of Aloe vera gel (Aloe barbadensis Miller).

The aim of this study was to evaluate the effects of high hydrostatic pressure treatment at three pressure levels (300, 400 and 500Mpa) on the functional and quality characteristics of Aloe vera gel including vitamin C and E, aloin, minerals, phenolic content and antioxidant activity. The results show that HHP exerted a clear influence on minerals content, vitamin C and E content, antioxidant activity, total phenolic and aloin content. After 35days of storage all treated samples presented a decrease in mineral content, except for phosphorus. Total phenolic content and vitamin C and E content decreased at high pressures (500MPa), while all pressurised samples showed a higher antioxidant activity and aloin content than untreated sample after 35days of storage. The maximum values of antioxidant activity and aloin were 6.55±1.26µg/ml at 300MPa and 24.23±2.27mg/100g d.m. at 400MPa.